Urban cooling: an innovative solution for climate adaptation
- District cooling networks are collective systems that distribute chilled water from production units to connected buildings.
- They offer numerous advantages, notably the ability to integrate renewable and waste heat energy sources that are difficult to utilise on the scale of an individual building.
- However, unlike heating, which is recognised as a right and is generally subject to robust legislation, cooling was, until recently, considered a luxury.
- At national level, France is one of the few countries to have set quantified targets for district cooling in its 2023 national energy planning strategy.
- To fully harness the potential of district cooling as a collective solution aimed at making cities more liveable, a societal and political shift is required.
District cooling systems are collective networks that distribute cold water from production units to connected buildings, typically offices, hotels, museums and hospitals. Cooling can be produced by lowering a fluid’s temperature through electrical compression or absorption from a heat source (including an existing district heating system), or through free cooling from river or sea water, as Paris does with water from the Seine1. Drawing on renewable sources or green electricity and combined with storage solutions such as ice or ice water to optimise production, district cooling offers numerous advantages for urban areas, notably as an ally against extreme heat events. Yet it remains underdeveloped2.

Different technologies are available and mature, and some even allow production of both heating and cooling depending on the demand. For instance, shallow geothermal heat pumps can provide heat in the winter and passive cooling in the summer (heat from the house is absorbed by the fluid and reinjected underground), while cooling production by absorption allows to valorise waste incineration through cooling when the heating demand is lower—like in the case Toulouse district heating and cooling network3.
Strengths, constraints and barriers
District cooling offers many advantages, such as making it possible to integrate renewable and recovered energy sources that are difficult to tap at the scale of an individual building. Centralising production also makes the system easier to optimise; economies of scale make efficient technologies affordable, strain on the electricity grid is lower than with individual units, demand can be monitored more closely, ice storage can shift production to off-peak hours, regular maintenance reduces risks, and the network can provide services to other energy networks. At the urban scale, district cooling is an almost invisible solution, with limited visual and noise nuisance4.
There are also limitations, but most are shared by all cooling technologies, individual ones included and are better managed collectively. Producing cold inevitably produces heat. With district cooling, this heat can be managed so that it does not worsen urban heat islands: with free cooling, for instance, it can be released into rivers under monitoring to ensure it does not harm the ecosystem. Refrigerant use is also reduced, and any leaks can be addressed quickly by dedicated maintenance teams. Nonetheless, like district heating and most urban infrastructure, district cooling faces real challenges. It requires long-term investment, careful planning, disruptive street works and multi-stakeholder governance. These challenges, together with the relatively low priority given to cooling, partly explain why these systems remain limited in Europe.
Unlike heating, which is recognised as a right and is usually well legislated, cooling was until recently considered as a luxury that had a relatively low-demand; although, the increased occurrences of extreme heat events caused by climate change may shift this view. And if it is quite usual to have heat demand maps, cooling demands are usually embedded into the electricity demand, making it harder to evaluate the needs.
From niche to policy lever
In 2024, France had 49 district cooling networks serving fewer than 2,000 buildings, compared with 1,041 district heating networks serving more than 50,000 buildings. Despite this modest scale, the trend is positive, with the number of networks growing every year5. Across Europe, around 200 district cooling networks were in operation in 2024, again up on the previous year. Most are located in France and Sweden, but new systems are being developed or expanded in major cities such as Lisbon, Barcelona, Vienna and Munich. By 2030, most growth is expected in Austria, France, Norway and Sweden6.
While the technology is mature and used throughout Europe, its legal framework varies from country to country. In some countries, such as France, public district cooling benefits from the same framework and support policies as public district heating. In others, such as Denmark, it falls under a market-based framework set by the 2008 District Cooling Act (revised in 2023), distinct from the regulated framework for district heating7.
District heating and cooling are often grouped together in national and European energy strategies, but in practice most policies focus heavily on heating at the expense of cooling. Despite this bias, some policy instruments and targets specific to district cooling do exist. District cooling is increasingly recognised as a relevant lever for local authorities, particularly municipalities, to support the ecological transition of urban areas, and knowledge networks have emerged at national, European and international levels (e.g. the EU-mayors or the International District Energy Association). These networks build and share expertise and can also inform policymakers about the benefits of district cooling and the sector’s needs. This dynamic is visible at EU level: a Delegated Act on renewable cooling was adopted in 2023 to complement the 2023 Renewable Energy Directive, prompting France to submit a revised methodology for urban cooling networks that discusses, among other things, the scope of « sustainable cooling » as defined by the Delegated Act.
At national level, France is one of the few countries to have set quantified targets for district cooling in its national energy planning strategy of 2023: tripling the amount of cooling delivered between 2023 and 2035. District cooling is supported by the same instruments as district heating, so municipalities and operators can access State subsidies and support, for instance through the Heat Fund (Fonds Chaleur) or energy savings certificates (CEE). At local level, cities throughout Europe are adopting ambitious plans that make district cooling a major lever of their ecological transition: Paris explicitly includes its cooling network and its expansion in its transition plans, and Vienna expects to double the size of its network by 2030.
A societal and political choice
Faced with extreme heat events, changing expectations on indoor comfort, increased density of IT equipment (in office buildings for instance) and an ageing population, the cooling demand in Europe is increasing. However, even though district cooling is widely recognised in the industry and research as an efficient collective cooling solution, it has yet to enter the public space and gain wider recognition.
Just like district heating systems, a district cooling system is only economically viable in areas with a high enough density of demand and upon approval of the building owner. This has several implications. First, it explains why, so far, district cooling has mainly developed in city centers with a high concentration of tertiary buildings (like offices and hotels etc.) and has prioritised the connection of such “big clients”. Second, upon the installation of more individual cooling solutions (primarily individual air-conditioning units), parts of the cities become unavailable for further district cooling development. Thirdly, the development of such infrastructure takes lots of investments and time, meaning that even areas that could previously be relevant for district cooling can see potential customers move towards quickly installed individual solutions as a reaction to extreme heats.
Even if summer of 2026 has revived the discussion, most of the cooling solutions for buildings remained centred on individual solutions.
Using district cooling to its full societal potential as a collective solution to make cities more livable requires a societal and political shift. It means integrating district cooling into urban plans to cool down cities (alongside e.g., building renovations, greening the pubic space, limiting dark asphalt) and securing areas for its development. Making it a solution accessible to everyone would require prioritising connecting more public buildings (e.g., schools, universities, hospitals) but also developing policies to support the connection of residential buildings. Residential buildings are usually difficult to connect due to the mixed ownership, low and seasonal demand as well as potential renovations needed. Regarding the connection of public clients, the first public hospital has been connected to Paris district cooling network in 2025, when the network is in operation since 1978.
In addition, district cooling still needs to make an appearance into the public space. Even if the summer of 2026 has revived the discussion on the “right for cooling” and the need to transform our urban space to ensure its liveability by 2050, most of the cooling solutions for buildings remained centred on individual solutions. One risk is the introduction of subsidies to support building-owners on the investment into a cooling solution, without prioritising district cooling over individual solutions in the areas where cooling demand would make district cooling a more relevant solution. Similar “tensions” between supporting instruments could be seen in the heating sector, with subsidies for the implementation of heat pumps taking customers away from district heating systems.
Overall, the demand for cooling is increasing and district cooling could benefit from this dynamic and support the making of liveable future cities, providing that awareness on this system is increased and relevant political and societal support emerge.

